Rhino WMBus Repeater
The Rhino WMBus Repeater operates as an 868 MHz standard signal extender, featuring single-hop functionality. It is powered by an external 5-12 VDC power supply.
Device overview
- Power socket
- SMA ISM antenna connector
Technical parameters
| Rhino communication | Frequency range 868MHz |
| Power supply | 5-12 VDC (0.1A) – power supply not included |
| Supported communication protocols | T1 and C1 mode wireless M-Bus |
| Configuration | Over the Air (OTA) |
| Operating temperature range | -40°C – 85°C (depending upon installed environment |
| IP Class | IP40 (not suitable for outdoor use) |
| Dimensions | 18 mm x 90 mm x 53 mm (1 DIN model) |
| Weight | ~0.05 kg |
| Led indications | Power (Red Permanent) – Power OK RX (Yellow Short Flash) – Data received TX (Green Short Flash) – Data sent |
| Install button | Enabling install mode |
| Install mode | Every 60 seconds during 1 hour period device transmits wireless MBus telegram with device serial number |
| Additional equipment | 1 x ISM antenna with 3m cable and magnetic base |
| Required cable types | Power supply thickens – 0.205-3.31 MM² – 24-12AWG |