Rozwiązania
Redukcja kosztówESG i zgodnośćRozliczenia i zaangażowanie najemcówZarządzanie nieruchomościamiOperacje portfelaUtility Data API
Produkt
PlatformaMonitorowanie energii elektrycznejMonitorowanie wodyMonitorowanie gazuMonitorowanie ciepłaMonitorowanie fotowoltaikiŹródła danychSprzętKonektory mediówInfrastruktura zewnętrzna
Narzędzia
Wszystkie narzędziaKompatybilność licznikówZasięg dostawców mediów
Branże
Wszystkie branżeLogistykaHandel detalicznyBiuraNieruchomości mieszkanioweDomy studenckieHotelarstwoOchrona zdrowia
Studia przypadkówBlogPartnerzy
ENNLDE
Umów demo

Which meters can Rhino read over RS232 optic head, IEC1107?

Rhino reads RS232 optic head, IEC1107 through a Rhino ED RS232, and each meter below carries its own install detail.

IEC 62056-21, still widely called IEC 1107, is the optical interface on the front of most utility-grade electricity meters. A head clips over the port and reads the meter the way a meter reader would.

Rhino reads it with an ED RS232 wired to the optical head. This is the usual route on main incoming meters, where the utility owns the meter and nothing may be wired into it.

It is slower and more limited than Modbus, so it is used where the meter offers nothing better, not by preference.

Rhino device
Rhino ED RS232
Also needed
One Rhino AP per building
Utilities
Electricity
Listed model required
Worth confirming

Any meter that speaks Modbus or M-Bus connects to the Rhino AP, whether or not we have set that model up before. What we have already configured is a record of past work, not a boundary. Tell us what you have at sales@rhino.energy and we will name the device you need.

Already configured

Meters we have already configured.

Reviewed 2026-08-25, and more are added every few months. If yours is not below, tell us what it is and we will confirm the device you need.

ManufacturerModelUtilityAll protocols on this meterMID
ApatorCorax 3ElectricityRS232 optic head, IEC1107Yes
ApatorSmartEsoxElectricityRS232 optic head, IEC1107Yes
ElsterA1440ElectricityRS232 optic head, IEC1107Yes
ElsterA1500ElectricityRS232 optic head, IEC1107 and RS485 IEC1107Yes
EMHLZQJElectricityRS232 optic head, IEC1107Yes
EMHLZQJ-XCElectricityRS232 optic head, IEC1107 and RS485 IEC1107Yes
GAMAG3BElectricityRS232 optic head, IEC1107Yes
IskraMT171ElectricityRS232 optic head, IEC1107No
Landis GyrZMD310ElectricityRS232 optic head, IEC1107Yes
Landis GyrZMG405ElectricityRS232 optic head, IEC1107 and RS485 IEC1107Yes
Pafal16EC3ElectricityRS232 optic head, IEC1107Yes
PozytonEABMElectricityRS232 optic head, IEC1107Yes
PozytonEQABPElectricityRS232 optic head, IEC1107Yes

Know the protocol. Now do the building.

Send us the meter list for a site and we will come back with the device per meter, the transformers and adapters it needs, and the parts of the job that need an electrician on site.