ABB meters Rhino reads
Rhino has configured ABB meters across electricity and water, read over RS485 Modbus, Pulse / S0 and Wireless M-Bus OMS.
2 of them measure through current transformers, which is the part of a ABB install worth checking before anything is scheduled: the CTs either exist already or an electrician has to add them. 4 carry MID certification, so their readings can be used to bill tenants.
What you see here is what Rhino has already configured. It is not the limit of what Rhino can read from ABB: any model on Modbus or M-Bus connects to the access point whether or not it appears below.
Any meter that speaks Modbus or M-Bus connects to the Rhino AP, whether or not we have set that model up before. What we have already configured is a record of past work, not a boundary. Tell us what you have at sales@rhino.energy and we will name the device you need.
ABB models we have already configured.
As of 2026-08-25, and more are added every few months. A model we have not configured yet is a different thing from one we cannot read.
| Model | Utility | Protocol | MID | Watch out for |
|---|---|---|---|---|
| A44 | Electricity | RS485 Modbus | Yes | Needs CTs |
| B21 | Electricity | Pulse / S0 | Yes | Nothing |
| B23 | Electricity | Pulse / S0 and Wireless M-Bus OMS | Yes | Nothing |
| B24 | Electricity | Pulse / S0 and RS485 Modbus | Yes | Needs CTs |
| WaterMaster | Water | Ask us | – | Interface not on file yet |
Got a building full of ABB meters?
Send us the meter list and we will come back with the device per meter, the transformers and adapters it needs, and the parts of the job that need an electrician on site. Before anyone talks about price.