Integrated

Is the Epever LS1024B compatible with remote monitoring?

Yes. Rhino already reads the Epever LS1024B over RS485 Modbus.

Utility

Sensor

Interfaces Rhino reads

RS485 Modbus

MID certified

Not on file for this utility

Driver

Epever:LS1024B

Software only possible

No, this one needs hardware

Rhino hardware

Confirmed with you before anything is ordered

Coverage reviewed 2026-08-25, and it grows continuously.

The answer that matters

What it takes.

Rhino has the Epever LS1024B configured already, so the connection is proven rather than probable.

It is read over RS485 Modbus, an interface Rhino connects to directly.

What the install looks like depends on the building and on which version of the meter is installed, so Rhino sizes it with you rather than reading it off a model number. That is one short conversation.

Every meter we read over RS485 Modbus Check another meter

On site

What connecting it involves.

The Epever LS1024B is read over RS485 Modbus. The expansion device connects to that output and reports to the access point, with no change to how the meter itself operates.

None of this covers site feasibility. RF range, cabinet access and power availability are survey questions, and a compatibility yes is not an installation yes.

Any meter that speaks Modbus or M-Bus connects to the Rhino AP, whether or not we have set that model up before. What we have already configured is a record of past work, not a boundary. Tell us what you have at sales@rhino.energy and we will name the device you need.

One meter checked. Now do the building.

Send us the meter list for the site and we will come back with the device per meter, the transformers and adapters it needs, and the parts of the job that need an electrician on site. Before anyone talks about price.

Talk to Sales See the hardware