Rhino WMBus
Gateway that receives RF data from any number of wmbus meters in the RF range and passes them through the RS232 serial port. Data transfer wired to the Rhino AP. Powered by external 5-12VDC power supply.
Device overview
- Power socket
- RS232 connection
- SMA ISM antenna connector
Technical parameters
| Rhino communication | Wired RS232 |
| Power supply | 5-12 VDC (0.1A) |
| Output | 1 x RS232 |
| Supported communication protocols | T1 and C1 mode wireless M-Bus |
| Configuration | Over the Air (OTA) |
| Operating temperature range | -40°C – 85°C (depending upon installed environment |
| IP Class | IP40 (not suitable for outdoor use) |
| Dimensions | 18 mm x 90 mm x 53 mm (1 DIN model) |
| Weight | ~0.05 kg |
| Led indications | Power (Red Permanent) – Power OK RX (Yellow Short Flash) – Data received TX (Green Short Flash) – Data sent |
| Reset button | Used during local firmware update |
| Additional equipment | 1 x ISM antenna with 3m cable and magnetic base |
| Required cable types | Signals thickness – 0.129-1.31 MM² – 26-16AWG Power supply thickens – 0.205-3.31 MM² – 24-12AWG |
Connection diagram example
Data Sheet download