Rhino ED DI

Expansion module to the Rhino AP. Reads data from devices via pulse inputs (S0). Data transfer wireless via RF to the Rhino AP. Powered by an internal high-capacity battery.

Device overview

  1. S0 pulse connections
  2. SMA ISM antenna connector
Rhino ED DI

Technical parameters

Rhino communication Frequency range: 433MHz, ISM 1 channel
Power supply 3.6V AA lithium battery (expected lifetime – 7 years)
Input 3 x 3V – 3.4V pulse input (max 24V voltage input)
or
3V – 11.8V pulse input (DIP switch enabled – max 24V voltage input)
2 x binary input (configurable remotely)
Display Alphanumeric with 8 characters
Configuration Over the Air (OTA)
Operating temperature range 0˚C – 85˚C (depending upon installed environment)
IP Class IP40 (not suitable for outdoor use)
Dimensions 52.5 mm x 90 mm x 65 mm (5 DIN modules)
Weight ~0.1 kg
Additional equipment 1 x ISM antenna with 3m cable and magnetic base
Required cable types Signals thickness – 0.129-1.31 MM² – 26-16AWG

Connection diagram example

Data Sheet download
Rhino ED DI Schema